显示标签为“hidden hinge”的博文。显示所有博文
显示标签为“hidden hinge”的博文。显示所有博文

2013年8月18日星期日

What is hinge made of?


By Kingwen Liang
What is kitchen cabinet hinge made of?It is often asked by the clients to Kingwen Liang.
Kitchen cabinet door Hinge, in the spring hinge industry which Kingwen Liang is engaged in, cold rolled steel Q195 is most used. About the knowledge of the cold rolled steel, please pay attention to the article below
The classification and use of the cold rolled steel and the cold rolled coil
Cold-rolled steel is short for the thin cold-rolled steel which is made from ordinary carbon structural, commonly known as the cold plate. Cold plate is the steel that made up of ordinary carbon structural steel hot-rolled steel belt; the thickness is less than 4mm after further cold rolling. The cold plate has a favorable quality and high precision in size because it is made in the room temperature and would not produce scale, plus with the annealing treatment, the mechanical properties and process performance are better than hot rolled steel, in many fields, especially in home appliance manufacturing areas, has been gradually replace the hot rolled steel.
Applicable grades: Q195 Q215 Q235 Q275 SPCC (Japan brand) ST12 (Germany brand)
Symbol:
1.      Q- The code for the ordinary carbon structural point (limit), it is the first word of Chinese phonetic alphabet. 195 215 235 255 275-represent the number the cold-rolled steel can bear (limit), the unit (MPa ). The Q235 is the best in the strength, plasticity, toughness of the ordinary carbon structural, it can meet the demand of daily use, so the application range is very wide.
2.      S-for steel. P for plate. C for cold-rolled. And the fourth-regular grade C for common.
3.      ST for Steel and the number 12 stand for the ordinary cold-rolled steel.
Mark: size precision-dimensions-plate breed standard
     Cold-rolled steel: Steel-technical condition standard
Mark example: B-0.57501500-GB708-88, Steel, Q/BQB402 Standard, grade (SPCC), annealing heat treatment state plus level(S), table textured D, with central processing status to surface quality level for FB trimming steel; the thickness is 0.5mm, B precision of width 1000mm. a level precision ,length is 2000mm, A level precision ,roughness of PF precision. A, is marked as: steel ECQ/BQB 402-(SPCC)-SD-FB/(A2000A-PF.0.51000A)
Cold-rolled steel: Q225-GB912-89
The main origin: Bao steel, steel, Ben steel, Wu steel, Han steel, Bao steel, Tang steel, Lian steel, Ji steel and so on.
Ordinary cold-rolled steel: This is made up of ordinary carbon structural or low alloy structural. It has a good surface quality and a perfect punching property. It requires passing the cold bending test, which is common used in the automotive industry.
High quality cold-rolled steel: mainly include all kinds of high quality cold-rolled steel; the most commonly used is the carbon structural, especially for deep drawing, which is composed of low carbon cold-rolled steel. According to the surface quality, divided it into three parts: I II III, respectively the special senior, senior and high rough surface, according to the drawing, can be divided into ZF, HF and F, due to the toughness of the steel, can deeply divided into A and B, is widely used in the automobile tractor industry.
Cold-rolled steel: with smoothly surface, excellent in processing, commonly used in the automobile refrigerator washing machine and other home appliance, it is also used in the industrial equipment and all kinds of building material. With the development of economy, the cold-rolled steel is called as the material of modern society.

The classification of cold-rolled product: hot rolled pickling, rolling hard, ordinary cold-rolled, galvanized (galvanized fingerprint resistant, hot dip galvanized), zinc, tin plate, coating, electrical steel (silicon steel ) and so on.
  

2013年7月23日星期二

Is Dongguan Shilong Wantong Industrial Co. Ltd a manufacture of slides and hinges or trade company ?


                                          By Cindy Liu
We always received such calls: I found your company in Alibaba, and noticed that your company sells 3 folds drawer slides .May I ask that is Dongguan Shilong Industrial Co. Ltd a manufacture or trade company ?

Some clients that never visited our factory just can’t help to ask if we are manufacture or trade company when seeing we write “Dongguan Shilong Wantong Industrial Co. Ltd”. Because many furniture and cabinet factory , especially trade company  prefer to buy from manufacture directly .In this way , they can get much cheaper goods without any profits earned by the mid trade Co. .
Professionally to say , Industrial Company is the fixed assets of the Trust ,producing according to the requested QTY by customer .Thus ,Dongguan shilong Wantong Industrial Co. Ltd is absolutely manufacture .Moreover ,it is industry manufacture .Factory can be never turned into industry company without strength .
With powerful production ,consummative matching service and thousands of normal and special 3 folds slides ,hinges, Dongguan Shilong Wantong Industrial Co. Ltd was established in 1981 .During the prosperous year 2000 , ,Dongguan Wantong Industrial Co. Ltd became the worldwide well-known brand in hardware area together with Hettich, Hafele, FGV, Stanley, etc. in China and be known as the biggest soft close drawer slides and cabinet hinges factory in China ,exporting to almost hundred countries and district


Remark : please don’t reprint or modify the article without any permission . The content of the article is only personal view and doesn’t represent the real authority report .You can also visit our website for more product information and installation skills . http://www.cabinethinge.cn , http://www.drawerslides.cn , http://www.kavhinge.com, http://www.kavslide.com

2013年7月22日星期一

The key factor affecting the lifetime of cabinets


Coupling head is also called cabinet hinge .It is the key component connecting cabinet and cabinet doors . Hinges stand the most test in our usual cabinet usage .So it is pretty important to choose hinges with excellent quality .The common opening angle of cabinet hinges is 90 and 95 degree which turns to be a right angle when the door is opened .There are also special angle hinges ,such as 165 degree hinges which the opening angle is 165 degree which the door can be more open and easier to reach things in the cabinet .Normally ,hinges are divided into one way and two way .One ways hinge can meet normal usage ,but two way hinges are much better . We also mentioned the difference between one way hinge and two way hinges in our article . Most hinges in the market are removable and are consisted of mounting plate and hinge body .We need remove hinge body together with cabinet doors and check the inner side of hinge .So irremovable hinges are not convenient in installment ,but same usage .
The steel of making hinges is very important . If you cannt choose it well , the door may stagger forward and back, and off angle .Cold rolled steel is popular in many famous top grade hardware factory ,cause its thickness and toughness are perfect .but there are also many manufactures use stainless steel material .Cause it can remedy the weakness of rusty in wet area when using normal steel . The thickness of steel is also a important element affecting hinge quality ,which decides how many load capacity can the door hold . So we must pay attention to this when selecting cabinets .
In addition ,you should try to choose damping hinge. The so called damping hinges means it will last a certain angle when the door is closed to avoid the door impact and noise caused by the hinges ,so your cabinet will not suddenly turn off ,thereby ensuring the usage of security .Besides damping hinges ,there are also rebound hinges .When people hands full of things ,then it is the protagonist. People only need to touch the cabinet door gently with body ,and it can open automatically ,which make our daily life more convenient .
Finally , the hinge must be able to adapt to the wet ,smoke and many other factors in kitchen .Cause it plays an important role in the lifetime of cabinets and takes the most tests ,not only linking the cabinet body and doors together ,but also bear alone the weight of the door and maintain consistency door arrangement unchanged , after a certain period of time, it will be loose .In the whole drawer design ,the most important accessories are drawer slides. Low-quality rails maybe be good in the short term ,but you will find it difficult to pull and push when it is used for a long time .The phenomenon is suitable for any products ,especially for big products .
Thus , "If the kitchen hinge is the heart of the cupboard, then the rail is the drawer kidney” .This saying is without any exaggeration and customer must pay attention to the furniture hardware accessories when purchasing cabinets .



2012/12/28
By:Nero_Chen