显示标签为“cupboard hinge”的博文。显示所有博文
显示标签为“cupboard hinge”的博文。显示所有博文

2013年8月18日星期日

What is hinge made of?


By Kingwen Liang
What is kitchen cabinet hinge made of?It is often asked by the clients to Kingwen Liang.
Kitchen cabinet door Hinge, in the spring hinge industry which Kingwen Liang is engaged in, cold rolled steel Q195 is most used. About the knowledge of the cold rolled steel, please pay attention to the article below
The classification and use of the cold rolled steel and the cold rolled coil
Cold-rolled steel is short for the thin cold-rolled steel which is made from ordinary carbon structural, commonly known as the cold plate. Cold plate is the steel that made up of ordinary carbon structural steel hot-rolled steel belt; the thickness is less than 4mm after further cold rolling. The cold plate has a favorable quality and high precision in size because it is made in the room temperature and would not produce scale, plus with the annealing treatment, the mechanical properties and process performance are better than hot rolled steel, in many fields, especially in home appliance manufacturing areas, has been gradually replace the hot rolled steel.
Applicable grades: Q195 Q215 Q235 Q275 SPCC (Japan brand) ST12 (Germany brand)
Symbol:
1.      Q- The code for the ordinary carbon structural point (limit), it is the first word of Chinese phonetic alphabet. 195 215 235 255 275-represent the number the cold-rolled steel can bear (limit), the unit (MPa ). The Q235 is the best in the strength, plasticity, toughness of the ordinary carbon structural, it can meet the demand of daily use, so the application range is very wide.
2.      S-for steel. P for plate. C for cold-rolled. And the fourth-regular grade C for common.
3.      ST for Steel and the number 12 stand for the ordinary cold-rolled steel.
Mark: size precision-dimensions-plate breed standard
     Cold-rolled steel: Steel-technical condition standard
Mark example: B-0.57501500-GB708-88, Steel, Q/BQB402 Standard, grade (SPCC), annealing heat treatment state plus level(S), table textured D, with central processing status to surface quality level for FB trimming steel; the thickness is 0.5mm, B precision of width 1000mm. a level precision ,length is 2000mm, A level precision ,roughness of PF precision. A, is marked as: steel ECQ/BQB 402-(SPCC)-SD-FB/(A2000A-PF.0.51000A)
Cold-rolled steel: Q225-GB912-89
The main origin: Bao steel, steel, Ben steel, Wu steel, Han steel, Bao steel, Tang steel, Lian steel, Ji steel and so on.
Ordinary cold-rolled steel: This is made up of ordinary carbon structural or low alloy structural. It has a good surface quality and a perfect punching property. It requires passing the cold bending test, which is common used in the automotive industry.
High quality cold-rolled steel: mainly include all kinds of high quality cold-rolled steel; the most commonly used is the carbon structural, especially for deep drawing, which is composed of low carbon cold-rolled steel. According to the surface quality, divided it into three parts: I II III, respectively the special senior, senior and high rough surface, according to the drawing, can be divided into ZF, HF and F, due to the toughness of the steel, can deeply divided into A and B, is widely used in the automobile tractor industry.
Cold-rolled steel: with smoothly surface, excellent in processing, commonly used in the automobile refrigerator washing machine and other home appliance, it is also used in the industrial equipment and all kinds of building material. With the development of economy, the cold-rolled steel is called as the material of modern society.

The classification of cold-rolled product: hot rolled pickling, rolling hard, ordinary cold-rolled, galvanized (galvanized fingerprint resistant, hot dip galvanized), zinc, tin plate, coating, electrical steel (silicon steel ) and so on.
  

2013年8月7日星期三

Why SS304 furniture hinge can be absorbed by magnet? (Original)

Why SS304 furniture hinge can be absorbed by magnet? (Original)
By Lucy (kav)
All this time, when customers use SS304 furniture hinge, they will have a question that Why SS304 hinge can be absorbed by magnet.
Large scale cupboard hinge factories will choose SS304 or SS201 as raw material to produce stainless steel hinge. However, some hinge factories will use inferior material instead of SS304 material to cheat customers. When choosing stainless steel hinge, customers can’t distinguish it by eyes, so they usually use a magnet to absorb the stainless steel hinge to judge whether it is made of stainless steel material or not.
As a matter of fact, it’s not correct to test whether stainless steel hinge is made of stainless steel material or not.
A hinge consists of many accessories, which are stamping by molds. Raw material is SS304, but stamping molds are iron, so iron will be left during productive process. Moreover, because accessories of hinge are made of anti-rust iron (Notice: the hinge body is made of pure SS304, but other accessories are made of anti-rust iron, because SS304 has strong hardness and is brittle, if used to produce accessories, they will be easy to crack during productive process and in using.), which also can be absorbed by magnet through stainless steel material, so if using a magnet to absorb a stainless steel hinge, it is normal that it can be absorbed by magnet. If the hinge is demagnetized, it can’t be absorbed by magnet, but many factories will don’t demagnetize their stainless steel hinge.
Only SS304 exclusive medicine can judge whether stainless steel hinge is made of SS304 material or not.
Here is a URL for reference: http://v.ku6.com/show/eesiF4B3tY_RCCoa.html?loc=tashangchuan     (Notice: This is an exclusive medicine to test SS304 and can be bought in hardware store)  Drop some exclusive medicine on hinge, if no color change of hinge, it’s made of SS304, if it turns red, it may be made of SS201 or other material.
Actually, customers can choose material of kitchen hinge according to their requirement, for example, SS304 hinge has strong rustproof capacity and normally used under moist condition, such as bathroom cabinet and kitchen cabinet, while anti-rust capacity of SS201 hinge is a little weaker, so SS304 hinge is a little expensive than SS201 hinge. 
 

Remark: It is forbidden to edit, modify or reprint without special permission by Lucy, or one should take responsibility for any loss.

2013年8月6日星期二

push open hinge, handle free push open


Modern civilization not only brings us lots of convenience, but also stressful and fast paced life. When people enjoy the rich material civilization, they also search for something to quiet their tense hearts and kitchen draw many people’s attention. A modern kitchen should have many merits and take function determine art as its design concept. Within this condition, lots of powerful and functional hardware accessories are produced.

Drawers are used a lot, which in one hand, can highlight the line of the whole set cabinet and bring people warm feel. In other hand, drawer can bring transfer of kitchen space, because when people want to pick out things they need, they just need to pull out the drawer, which reduce a series movement of bend down, stretch out hand and so on. It’s both convenient and reducing labor strength of cooking. There are other functional accessories for drawer, including furniture hinge, gas spring, etc. Kitchen hardware fully show the function of the whole kitchen and frequently be used, so quality of hardware is very important, including drawer slide, kitchen hinge, gas spring and other household hardware.

With the openness of kitchen, open means of door transfers from pull-out to touch-open. Handle free touch open is becoming the most popular factor for modern kitchen cabinet and furniture.

During this half year, there are several customers who inquired the price and whether touch open hinge for export or not, from which can prove that many people pay their attention to touch open cupboard hinge.

Remark: It is forbidden to edit, modify or reprint without special permission by Kingwen Liang, or one should take responsibility for any loss.

2013年8月5日星期一

What’s the Difference Between One Way Furniture Hinge and Two Way Cupboard Hinge? (Original)

What’s the difference between one way furniture hinge and two way cupboard hinge? To this day, many people ask me this question.

Actually, for this question, I already talked about it in my former blogs, but I explained it in two articles.

In article, How to Choose a Suitable Cabinet Hinge—One Way Furniture Hinge, I  mentioned that only bring the door gently, then it will close quickly after installing one way furniture hinge, whose feature is quick and powerful. If you are willing to have such quick and powerful effect, one way furniture hinge is the best choice.

In article, How to Choose a Suitable Cabinet Hinge—Two Way Cupboard Hinge, I mentioned that the door can stop at any angle before 45 degree, after 45 degree, the door will auto-close. Of course, there some cabinet hinge that will auto close at 30 degree and some will auto close after 60 degree.

As for customers, they can choose one way furniture hinge or two way cupboard hinge basis on themselves. Everyone has his/her own favorite. You want quick close or soft close?

  Hinges are divided into following series:
1.Kitchen cabinet hinge series: Generally speaking, demands of kitchen cabinet hinge is higher than furniture hinge, including durability and rustproof capacity.
                  
2. Furniture hinge series: furniture hinge is the most economical and most used by furniture factories in China and Middle East.
3. Soft close hinge series: hydraulic hinges also called soft closing hinges, which is the most eye catching product in hinge industry, whose feature is soft closing without noise. What’s more, it is the main product to be researched and developed and now it’s exported to many countries, such as America, Canada, Russia, Spain, Portugal, Taiwan, etc.
  
  4.Special hinge series: special hinge includes glass hinge, aluminum frame hinge, 170 degree hinge, faceframe hinge, touch open hinge and so on, which can make your furniture much more special.
  
  5.Furniture hardware series: drawer slide, gas spring, lid stay, sliding door damper, cabinet suspension, etc.


Remark: It is forbidden to edit, modify or reprint without special permission by Kingwen Liang, or one should take responsibility for any loss.

2013年8月4日星期日

How is Chinese furniture hinge, compared with international top brand, such as Hafele, Ferrari, Blum and so on?

How is Chinese furniture hinge, compared with international top brand, such as Hafele, Ferrari, Blum and so on?
How is Chinese furniture hinge, compared with international top brand, such as Hafele, Ferrari, Blum and so on? There are lots of people inquiring Kingwen Liang this question.
As a matter of fact, cupboard hinge industries in the world pay their attention to China, for the fast development of Chinese furniture hinge industry as other normal industries. Plenty of top hinge brands worldwide have built office and production base and found factories to do OEM in China, which makes a great progress for productive technology of Chinese furniture hinge, even quality of some cabinet door concealed hinge is close to world quality.
Take two way hinge as an example, which is the most used cabinet door hinge in the world, after several decades of development, Chinese two way hinge gains the trust of hinge users worldwide. Compared with world-class brand, such as Hafele, Ferrari, Blum, Mepla, Hettich and so on, Chinese two way hinge gets approval from hinge industries all over the world, for its competitive price and stable quality. Besides, two way hinge is done OEM for world-class top brands the most as well.
Compared to world class top brands, what are the disadvantages of Chinese hinge? It’s a little hard to say, but Kingwen Liang will put forward his own opinions here.
First, for stability of quality of Chinese two way hinge, it’s almost equal to world class top brands, such as Hafele, Ferrari, Blum, Mepla, Hettich, etc.
Second, in these two years, because of the rapid increase of electroplating material, it leads to the decrease of quality of electroplating material and result in worse rustproof capacity of Chinese furniture hinge, compared to overseas brands that apply stable electroplating material and more advanced technology of electroplating technology.
Third, for hinge product line, because of its deficient ability to research and develop types of kitchen hinge, Chinese furniture hinge product line is not as varied as overseas brands, so is the loyalty. For quality, quality of Chinese furniture hinge is ok for those which are produced a lot, but for high-end clip on technology and soft close technology, Chinese hinge can’t be mentioned in the same breath as world-class top brands, which demands lots of effort to catch up with them.
Fourth, hydraulic hinge overseas, whose hinge and damper is separated, though Chinese manufacturers are trying to produce high-end inner damper system integrated with hinge, for intensive competitiveness of Chinese market, many factories focus on price and result in trust problem of quality. It’s a mix of hope and fear.
Finally, for brand promotion, Chinese hinge brand is far behind international brands, such as Hafele, Ferrari, Blum, Mepla, Hettich and so on, which produce a culture makes customers look forward to.
Chinese hinge manufacturers mainly gather in Guangdong. If Chinese hinge wants to go international, Kingwen Liang suggests that instead of infighting and reducing quality and price,they should build a hinge alliance to promote development of hinge industry as lighter industry in Zhejiang. On the other hand, Chinese customers should choose hinge reasonably, rather than just focus on price and fancy packing, which is no good for themselves and the development of Chinese hinge industry.

Remark: It is forbidden to edit, modify or reprint without special permission by Kingwen Liang, or one should take responsibility for any loss.

2013年7月28日星期日

With half overlay hinge, how to solve the collision when cupboard open?

With half overlay hinge, how to solve the collision when cupboard open?
By Kingwen Liang
This is the question from a friend online at eleven o’clock.
F(for friend ): Hello, here is the question, the two cupboards of the cabinet share the side panel, using the half overlay cabinet hinge, but when I open one of the cupboard, it will hit the other, so, how to solve the problem? The gap of the two doors is about 2 to 3mm.
Kingwen Liang: About the question, firstly we should consider whether the door is too thick (Now many people use the 25mm cupboard), if you choose the ordinary 18mm kitchen hinge, then the collision is inevitable, because the door is too thick, its corners will produce an arc. If this is the issue, I suggest you to use the hinge which is made for the thick cupboard. The holes of thick door hinge are generally 40mm, 5mm longer than regular hinge, within using the thick door hinge, can be very good to avoid the angle problem caused by the door is too thick. Secondly, if it is only the ordinary 15mm or 18mm cupboard, and the door hinge is the conventional product ,then you can try to down the adjusting screw a little bit, about 1mm or 2mm on both sides, it may can solve the problem.(You can see how to adjust on the picture above)
Note: Half overlay hinge, the so-called half-cover hinge, hinge in bending; the ordinary thickness is 9mm.
PS: I got a message below in nine thirty on 23th, September, 2008

Thank you a lot. The door is too thick indeed, and it is aluminum frame doors. I have replaced the half overlay removable hinge to the half overlay ordinary hinge, then the problem solved. Thank you very much, I often read your blog, throughout your blog , I have a better understanding of cupboard hinge, and have been interested in it, hope can be your agent in the future. 

2013年7月24日星期三

What kind of hinge is better for furniture?


What kind of hinge is better for furniture?
A customer from abroad contacted me on the net. He’s a cabinet manufacturer and wanted to know how to choose the furniture Hinges.

“Have you ever used Hinges?” I asked him. “Yes, we have, but without damper. And my clients asked us to change Hinges, because it will make a noise when closes door using the former normal hinge. So, I’d like to know what kind of Hinge is the best.” He answered me.  “Hinges with damper can help you solve your problem.” I said.

I sent him our catalogue about Hinges and then introduced many kind of Hinges for cabinet to him also showed him its function and advantage. One is hydraulic one way Hinge; one is two way concealed Hinge; one is clip on soft close hinge; one is 3D fast transfer hydraulic hinge. Clip on concealed hinge and 3D fast transfer hydraulic hinge can be produced with two way function.

Beyond that,3D fast transfer hydraulic hinge is exported to other countries the most.
“Due to the expensive labor costs abroad, many cabinet manufactures prefer 3D fast transfer hydraulic hinge that can save a great number of labor costs.

He’s very satisfied with my introduction, because he only knew a little about Hinges before. He said we almost have all types of hinges. Finally, he asked me to send him two samples of each type of our hinges.

After he tested our product, he spoke highly of our quality. “Have you ever attended any foreign Fairs before? It seemed that I’ve met you before.” He asked me. “Yes, most of our business came from abroad before 1998, thus, we took part in the foreign fairs generally. But after 1998, we started to look for domestic market. That is why we are not as famous as DTC for now.” I answered. After chatting many times and further knew us, he asked his domestic friends to visit our factory then we got an order and shipped the cupboard hinges to him from Guangzhou port via less container load.

Though the order is not too large, I think the most important for customers is to find an honest and reliable supplier.

Remark: It is forbidden to edit, modify or reprint without special permission by Kingwen Liang, or one should take responsibility for any loss.