显示标签为“heavy duty hinge”的博文。显示所有博文
显示标签为“heavy duty hinge”的博文。显示所有博文

2013年7月28日星期日

With half overlay hinge, how to solve the collision when cupboard open?

With half overlay hinge, how to solve the collision when cupboard open?
By Kingwen Liang
This is the question from a friend online at eleven o’clock.
F(for friend ): Hello, here is the question, the two cupboards of the cabinet share the side panel, using the half overlay cabinet hinge, but when I open one of the cupboard, it will hit the other, so, how to solve the problem? The gap of the two doors is about 2 to 3mm.
Kingwen Liang: About the question, firstly we should consider whether the door is too thick (Now many people use the 25mm cupboard), if you choose the ordinary 18mm kitchen hinge, then the collision is inevitable, because the door is too thick, its corners will produce an arc. If this is the issue, I suggest you to use the hinge which is made for the thick cupboard. The holes of thick door hinge are generally 40mm, 5mm longer than regular hinge, within using the thick door hinge, can be very good to avoid the angle problem caused by the door is too thick. Secondly, if it is only the ordinary 15mm or 18mm cupboard, and the door hinge is the conventional product ,then you can try to down the adjusting screw a little bit, about 1mm or 2mm on both sides, it may can solve the problem.(You can see how to adjust on the picture above)
Note: Half overlay hinge, the so-called half-cover hinge, hinge in bending; the ordinary thickness is 9mm.
PS: I got a message below in nine thirty on 23th, September, 2008

Thank you a lot. The door is too thick indeed, and it is aluminum frame doors. I have replaced the half overlay removable hinge to the half overlay ordinary hinge, then the problem solved. Thank you very much, I often read your blog, throughout your blog , I have a better understanding of cupboard hinge, and have been interested in it, hope can be your agent in the future. 

2013年7月2日星期二

How to install cabinet hinges


With two built-in rotatable Baskets cabinets, doors and door frames need to fix, the most important decision is due to its built-in drawer opening angle to be very large, then the curvature of the cabinet hinge had to be large enough to ensure that you can free to open the door to the right angle and easily pick and place any items.

1.The hinge seat insert in the end, and then the hinge arm gently pressed with your fingertips while you can hear a "click" sound, indicating pivot hinge arm safely through five hook of the hinge base. In principle, the process is quick cross through from top to bottom in order to complete, most upper door hinge bear full weight.

2.Just the opposite demolition process is carried out from the bottom up. Gently press for safety through hidden inside the spring hinge arm sliding bolt, you can remove the hinge. By the same procedure, the hinge arm removed from the base, so that the door can be taken away from the front.

3.A link between the door and the board - concealed hinges
In order to enhance the kitchen's storage capabilities, and ultimately, to design some high cabinet, part of which is on the door of the cabinet, this cabinet can not be separated flap hinge. On the flap and side panels can be installed on each hinge, making flap can add up in the end, brought a lot of convenience.