显示标签为“hydraulic hinge”的博文。显示所有博文
显示标签为“hydraulic hinge”的博文。显示所有博文

2013年7月31日星期三

Can we distinguish high quality hydraulic soft close hinge from the one with bad quality via intuition?


Yesterday, I met a boss whom I’ve known him since 2001 and we’ve done business for four or five years.
He was so happy to meet me at the gate of his factory as soon as I got off the car. “Glad to see you again,Kingwen”, He said.
“Yeah, long time no see”, I answered him with a smile. After 2006, we have not seen each other nearly for 6 years, due to the fact that clients demanded much higher level products,so that they changed cabinet hinge supplier.
After greetings and knowing recent situation between us, he showed me our kav brand hydraulic hinge and said “The soft close function is a little fast. It seems that the furniture hinges we use now are better. Is the buffering effect not enough? It is better that the door can soft close at angle of 30 degree and will not produce noise.
“It does not matter, and we can adjust its speed as long as you put forward your demands. I am here now, and we can solve all problems right away. Or if you have any new requirements, extra function or new design, maybe I can help you out.  Also you can ask a technologist to install this soft close hydraulic hinge with me and compare it with your previous ones and which one is better can be found out soon” I said. They readily agreed, after finishing installation, he looked at it and said the effect is almost the same.
Moreover, when he pulled the door at 35°Angle and then loosened his hands, the hydraulic hinge they used before didn’t have the function of buffering and made a big noise, while our kav brand hydraulic hinge soft closed with great buffering function and without any noise.
Now customer is very satisfied with our soft closing hinge, and he knew some of his friends also have been using our hinges for years. He suggested that he will place order for our soft close hydraulic hinge and soft close slide in a few days.
So, here underline again by Kingwen, I already uploaded lots of articles about how to distinguish hinges. Currently, with the increasing requirement of customers and development of domestic hydraulic hinges technology, it is difficult to distinguish soft close hinge of bad quality from the one with good quality, if only with our eyes and several close-open movement. We have to try to use them and as the time goes by, there will show up the differences.

What do you think?


Remark: It is forbidden to edit, modify or reprint without special permission by Kingwen, or one should take responsibility for any loss.

2013年7月28日星期日

With half overlay hinge, how to solve the collision when cupboard open?

With half overlay hinge, how to solve the collision when cupboard open?
By Kingwen Liang
This is the question from a friend online at eleven o’clock.
F(for friend ): Hello, here is the question, the two cupboards of the cabinet share the side panel, using the half overlay cabinet hinge, but when I open one of the cupboard, it will hit the other, so, how to solve the problem? The gap of the two doors is about 2 to 3mm.
Kingwen Liang: About the question, firstly we should consider whether the door is too thick (Now many people use the 25mm cupboard), if you choose the ordinary 18mm kitchen hinge, then the collision is inevitable, because the door is too thick, its corners will produce an arc. If this is the issue, I suggest you to use the hinge which is made for the thick cupboard. The holes of thick door hinge are generally 40mm, 5mm longer than regular hinge, within using the thick door hinge, can be very good to avoid the angle problem caused by the door is too thick. Secondly, if it is only the ordinary 15mm or 18mm cupboard, and the door hinge is the conventional product ,then you can try to down the adjusting screw a little bit, about 1mm or 2mm on both sides, it may can solve the problem.(You can see how to adjust on the picture above)
Note: Half overlay hinge, the so-called half-cover hinge, hinge in bending; the ordinary thickness is 9mm.
PS: I got a message below in nine thirty on 23th, September, 2008

Thank you a lot. The door is too thick indeed, and it is aluminum frame doors. I have replaced the half overlay removable hinge to the half overlay ordinary hinge, then the problem solved. Thank you very much, I often read your blog, throughout your blog , I have a better understanding of cupboard hinge, and have been interested in it, hope can be your agent in the future. 

2013年7月24日星期三

What kind of hinge is better for furniture?


What kind of hinge is better for furniture?
A customer from abroad contacted me on the net. He’s a cabinet manufacturer and wanted to know how to choose the furniture Hinges.

“Have you ever used Hinges?” I asked him. “Yes, we have, but without damper. And my clients asked us to change Hinges, because it will make a noise when closes door using the former normal hinge. So, I’d like to know what kind of Hinge is the best.” He answered me.  “Hinges with damper can help you solve your problem.” I said.

I sent him our catalogue about Hinges and then introduced many kind of Hinges for cabinet to him also showed him its function and advantage. One is hydraulic one way Hinge; one is two way concealed Hinge; one is clip on soft close hinge; one is 3D fast transfer hydraulic hinge. Clip on concealed hinge and 3D fast transfer hydraulic hinge can be produced with two way function.

Beyond that,3D fast transfer hydraulic hinge is exported to other countries the most.
“Due to the expensive labor costs abroad, many cabinet manufactures prefer 3D fast transfer hydraulic hinge that can save a great number of labor costs.

He’s very satisfied with my introduction, because he only knew a little about Hinges before. He said we almost have all types of hinges. Finally, he asked me to send him two samples of each type of our hinges.

After he tested our product, he spoke highly of our quality. “Have you ever attended any foreign Fairs before? It seemed that I’ve met you before.” He asked me. “Yes, most of our business came from abroad before 1998, thus, we took part in the foreign fairs generally. But after 1998, we started to look for domestic market. That is why we are not as famous as DTC for now.” I answered. After chatting many times and further knew us, he asked his domestic friends to visit our factory then we got an order and shipped the cupboard hinges to him from Guangzhou port via less container load.

Though the order is not too large, I think the most important for customers is to find an honest and reliable supplier.

Remark: It is forbidden to edit, modify or reprint without special permission by Kingwen Liang, or one should take responsibility for any loss.


2013年7月9日星期二

Determination of the quality and selection of cabinet



         In the market, we can see a variety of sets of cabinets, the price gap is also great, how to judge the quality of the cabinet and cons? From the detail view, judge the quality of the cabinet the following main points:

Look Edge: In the case of large manufacturers of cabinets and small workshop production of cabinets, the most important thing is to look at the cabinet edge. Large manufacturers use modern machinery and equipment, the use of high temperature and pressure Edge, Edge neat appearance after the firm, long-term use to avoid moisture damage to the cabinet, the cabinet can make more durable.

See hardware accessories (eg soft closing hinge rail): For items orderly place where it is necessary to use some metal parts (eg concealed hinges slide) to achieve the purpose, such as for corner cabinets placed rotating disk, push-pull lockers separation racks. Good cabinets are metal accessories (such as kitchen hinge rails) and the cabinet body, the perfect combination of doors, when used to open and close freely, no noise, can withstand a million times on the switch without deformation damage.

Seal Design: Countertops adding special sealing design allows easy to fall into the water table cupboard cabinets and that is a guarantee of long-term use can cabinets.

Cabinet material environmental protection is very important, mainly in used plates, countertops and sealing of the adhesive. These materials have to meet environmental requirements. Which plates need to use man-made sheet formaldehyde emission standards, and countertops to fire board and artificial stone is a better choice.


Comprehensive and detailed service is also an important condition for a good cabinet. Includes not only the pre-site survey design, sales in the careful installation, but also includes service. Such as creating user profiles, and timely visit, there are problems to solve and so on.

2013年6月24日星期一

Can we distinguish high quality hydraulic soft close hinge from the one with bad quality via intuition?


Yesterday, I met a boss whom I’ve known him since 2001 and we’ve done business for four or five years.
He was so happy to meet me at the gate of his factory as soon as I got off the car. “Glad to see you again,Kingwen”, He said.
“Yeah, long time no see”, I answered him with a smile. After 2006, we have not seen each other nearly for 6 years, due to the fact that clients demanded much higher level products,so that they changed hinge supplier.
After greetings and knowing recent situation between us, he showed me our kav brand soft close hinge and said “The soft close function is a little fast. It seems that the hinges we use now are better. Is the buffering effect not enough? It is better that the door can soft close at angle of 30 degree and will not produce noise.
“It does not matter, and we can adjust its speed as long as you put forward your demands. I am here now, and we can solve all problems right away. Or if you have any new requirements, extra function or new design, maybe I can help you out.  Also you can ask a technologist to install this soft close hinge with me and compare it with your previous ones and which one is better can be found out soon” I said. They readily agreed, after finishing installation, he looked at it and said the effect is almost the same.
Moreover, when he pulled the door at 35°Angle and then loosened his hands, the soft close hinge they used before didn’t have the function of buffering and made a big noise, while our kav brand soft close hinge soft closed with great buffering function and without any noise.
Now customer is very satisfied with our soft closing hinge, and he knew some of his friends also have been using our concealed hinges for years. He suggested that he will place order for our soft close hydraulic hinge and soft close slide in a few days.
So, here underline again by Kingwen, I already uploaded lots of articles about how to distinguish hinges. Currently, with the increasing requirement of customers and development of domestic soft close hinges technology, it is difficult to distinguish soft close hinge of bad quality from the one with good quality, if only with our eyes and several close-open movement. We have to try to use them and as the time goes by, there will show up the differences.

What do you think?


Remark: It is forbidden to edit, modify or reprint without special permission by Kingwen, or one should take responsibility for any loss.